Moisture / Dust Resistant Cabinet

Fully welded, 16 gauge Steel Frame with solid side panels
All seams are fully welded to withstand air, dust, or water entry.
Rated at 2000 LBS static load
Front and rear doors feature liftoff hinges and locks. Durable closed-cell neoprene gasket and compression latches form a seal.
Front door features an acrylic insert installed with neoprene gasketing and compression brackets to protect the cabinet envelope.
Rear door features a double opposed louvered panel, fan plenum, and fan. This was designed to resist water intrusion into the cabinet from overhead sprinklers or similar sources.

Two pair of 10 Universal Mounting Rails. Rails are fully adjustable throughout the entire cabinet depth. These rails run to the cabinet base to support the heaviest equipment.
Bottom cabinet closure plate may be removed for cable access on raised floor, brush cable entry fitting, or grommet cutout. Customer specific cutouts or gland plates also available. Bolt down holes, if needed, are in the base of the cabinet.
Accepts all standard rack mount equipment.
Slit Cable Entry Grommet is standard. Cable brush assembly is optional.

Casters, Dolly Base w/ Levelers
Various fan and fan plenum mounting options
Bottom rack mount blower with filtered intake to help pressurize the cabinet heavy dust environments.
Closed loop air conditioning for extreme operating environments
Removable side panels with neoprene gasket
Wide array of shelving options
Broad range of power strip options up to 30A; IEC and foreign plugs and receptacles and locking plugs available
Vertical and horizontal cable management
Other mounting rail options are: Round thru holes; Tapped 10-32, 12-24, M-6
Individual Rack Unit Numbering
Grounding: Bus Bar, Ground Straps